Call Aerodyne now on +44 (0)1778 422 000
Email us at sales@aerodyneuk.com
Aerodyne designed a bespoke air deflector kit to suit the Solomon’s Slipstream body for Palmer and Harvey. The top deflector moulding had to blend in with the radius on the body roof and sit down low on the cab roof for maximum aerodynamics. This new Air kit was an advance for P&H, who reported an … Continued
Aerodyne has been working in conjunction with Kerry Foods, a leading fleet operator in the global food market trialing a fuel-saving cab top deflector. The vehicle was tested for a period of weeks with and without the deflector, resulting in an increase from 19.1 to 21.5MPG, which is 11.2% fuel-saving! These results show how much … Continued
KBT recently bought two Sprinters with curtainsided bodies. One vehicle was fitted with Aerodyne’s 3D Cab Top Fairing and Sidewings, and the other was left plain. The plain vehicle is achieving 19mpg but the streamlined vehicle is doing 24mpg, representing a fuel saving of around 20% using Aerodyne’s Kit. Both Sprinters were bought on the … Continued
Aerodyne Equipment was asked to come up with an aerodynamic solution to improve on the Scania factory fitted air management kits. Following fitment and successful operation of the vehicles with the new air kits from Aerodyne, Hargreaves reported fuel savings in the region of 6.9% additional to those received from the factory kit. These results … Continued
Aerodyne has run a fuel-saving trial with a large fleet operator in the food logistics market. The same refrigerated vehicles were tested over a year on urban and motorway routes without truck fuel-saving aerodynamics, with a 3D fairing only and with a 3D fairing and cab rear sidewings, resulting in increases of MPG as per … Continued
The Fleet Operator was running Volvo FM tractive units with 4.5 metre high trailers, the Factory-supplied air management kit was not high enough to give efficient air flow over these very high trailers. Volvo’s Norwich dealership called Aerodyne in to help address this problem. Aerodyne designed, tooled and produced a suitably high kit, and supplied … Continued
Brief: To improve the aerodynamics on tractive unit pulling excessively high trailers where the factory supplied kit was not dimensionally adequate. Solution: Aerodyne utilised and fitted the very highest combination available for the Scania range to deflect air better over the top of the trailer. Reported Results Fuel Saving Improvement over factory fitted kit 2-3% … Continued
Aerodyne has run a fuel-saving trial with a large fleet operator in the food logistics market. The same refrigerated vehicles were tested over a year on urban and motorway routes without truck fuel-saving aerodynamics and then with a 3D fairing and cab rear sidewings, resulting in increases of MPG as per the below when Aerodyne … Continued
